Crawler Cranes

Our crawler cranes are designed to lift, transport and place up to loads of 2000kg. Operating on tracks rather than outriggers, these cranes can work within restricted areas and with the pick and carry duty not only can you lift your load but you can move with it.

Crawler Cranes

Our crawler cranes are designed to lift, transport and place up to loads of 2000kg. Operating on tracks rather than outriggers, these cranes can work within restricted areas and with the pick and carry duty not only can you lift your load but you can move with it.

LC383 Mini Crawler Crane

The Maeda LC383 is one of the most underestimated Mini Cranes in the industry, it has a maximum lifting capacity of 2930KG and a maximum lifting height of 9.3 meters. It has a pick and carry duty of up to 1465KG, along with near zero tail swing and a working footprint of only 1740mm X 2125mm, this crane is perfect for work in the most confined areas
Features
  • 2.93t lift max. lift capacity
  • 1.46t pick & carry
  • Open but covered cab
  • Minimal Tail Swing
  • Steel Tracks
  • Variable (Hi/Lo) Travel Speeds
  • Programmable Moment Limiter
  • Hydrostatic Transmission
  • 4 Fall / 2 Fall Hook Block
  • Tilt Sensor/Alarm
  • Powerful Two Speed Winch & Hydraulic Disc Brake
  • Optional Extras: Fly Jib, Single Fall Hook, Rubber Shoes, Slew Restrictor, Front Blade.
Technical Sheet
DOWNLOAD PDF HERE

Model

LC383 

Crane capacity

2.93t x 1.5m

Max. working radius

8.38m x 200kg

Max. hook height

9.3m x 1190kg

Boom length

3.18 m – 8.71 m

Slewing system

360º continuous / 2.6 rpm

Dimensions

4020mm x 1740mm x 2495mm

Weight

4400kg

Standard equipment

Overwind protection, steel tracks, hydraulic safety valve, level, travel

lock lever, tilt alarm, EMO switch, moment limiter, working status lamp,

data logger, blade with interlock system, 4-fall / 2-fall hook block

Optional equipment

Fly Jib, Single Fall Hook, Rubber Shoes, Slew Restrictor, Front Blade.

LC785 Mini Crane

LC785 Mini Crawler Crane

The LC785 is a large mini crawler with the advantage of pick and carry duties. Operating on tracks rather than outriggers, this crane can work within restricted areas as it has a width of only 2.4m. With the pick and carry duty not only can you lift your load but you can move with it! This crane features a maximum boom length of 15.63m and huge 4.9tons of lifting capacity, with a maximum working height of 16.3m. With a comfy cab and minimal tail swing this is the ultimate crane for tight areas requiring large lifting capacities and is a class leader in safety on site.
Its extremely compact design (2.36 m wide / 2.80 m high) allows the crane to operate in extremely tight spaces. This means that this mini crawler crane can be used for work in tunnels and subway passages. The compact LC785 is the best in its class when it comes to safety on construction sites with its minimum rear overhang.
Features
 
    • Diesel engine (EPA compliant)
    • Pick and carry capability
    • Fully enclosed air conditioned cab
    • Two-speed functions
    • Fly Jib option
    • 360° swing & near zero tail swing
    • Steel tracks (optional rubber pads)
    • Blade attachment (standard)
    • Diesel engine (EPA compliant)
    • Pick and carry capability
    • Moment Limiter (stan
Technical Sheet
DOWNLOAD PDF HERE

Model

LC-785

Crane capacity

4.9t x 2.0m

Max. working radius

14.52m x 200kg

Max. hook height

Approx. 16.3m ( 20.3m with fly jib )

Boom

5-section hydraulically telescoping boom of pentagonal box construction

Boom length

4.63m – 15.63 m

Slewing system

360 continuous, by a hydraulic motor

Traction system

Hydraulic motor driven, stepless speed changer

Traveling System

Hydrostatic transmission

Dimensions

2840 x 2360 x 2795 mm ( with boom flat 5020 x 2360 x 2795 )

Weight

10250 kg

Standard equipment

Steel tracks, air conditioning, heater, tilt alarm and blade

Optional equipment

Radio control

Maeda CC985 crawler crane

CC985 Mini Crawler Crane

The CC985 is a large mini crawler with the advantage of pick and carry duties. Operating on tracks rather than outriggers, this crane can work within restricted areas as it has a width of only 2.4m. With the pick and carry duty not only can you lift your load but you can move with it! This crane features a maximum boom length of 15.63m and huge 4.9tons of lifting capacity, with a maximum working height of 16.3m. With a comfy cab and minimal tail swing this is the ultimate crane for tight areas requiring large lifting capacities and is a class leader in safety on site.
Its extremely compact design (2.36 m wide / 2.80 m high) allows the crane to operate in extremely tight spaces. This means that this mini crawler crane can be used for work in tunnels and subway passages. The compact CC985 is the best in its class when it comes to safety on the construction site with its minimum rear overhang.
Features

 

  • 4.9 Ton Max capacity
  • 16.5m Max Working Height 20.2m With Optional Fly Jib
  • Diesel engine (EPA compliant)
  • Pick and carry capability
  • Fully enclosed air conditioned cab
  • Fly Jib option
  • 360° swing & near zero tail swing
  • Blade attachment (standard)
  • Diesel engine (EPA compliant)
  • Moment Limiter (standard)
Technical Sheet
DOWNLOAD PDF HERE

 

Model

Maeda CC985

 

Crane capacity

4.9t x 2.1m

 

Max. Working Radius

14.67m x 0.20t

 

Max. Lifting Height

Approx. 16.5m ( 20.2m with fly jib )

 

Dimensions

5,190 X 2,320 X 2,730mm

 

Weight

9,450kg (9,630kg with fly jib)

 

Winch System

Hook speed 30.0/min (4 layers, 4falls) – 44.0m/min (4 layers, 4 falls)

Hoist wire rope – IWRC 6 X Fi(29) Ø10mm X 115m

Wire falls for hook – 4 falls / 2 falls

 

Traveling System

Travel speed – 0 – 3.2km/h

Gradability – 34deg

Ground pressure – 46.8kpa [0.47kgf/cm2], 47.1kpa [0.48kgf/cm2] with fly Jib]

 

Standard Equipment

Overwind protection, Hydraulic safety valve, Wire rope latch, Level, Safety lock lever, tilt alarm, EMO switch, Moment limiter, LED working status lamp, Rear view camera, data logger.

 

Optional equipment

Single fall hook, Fly jib

Need the full lift planning?

Find out about our full contract lift service, where we plan and carry out the lift for you.

Benefits of using Mini Cranes:

  • Ability to perform in smaller areas – Because of the small size, mini cranes are perfect for small working areas where larger cranes can’t be used.
  • Easy relocation – Because mini cranes are easy to install and dismantle, they can be easily moved from one location to another. The crane can be transported by a small vehicle and does not require human power.
  • Cheaper alternative – Because mini cranes are so versatile, they are a more cost-effective alternative to larger, more expensive cranes.
  • Multiple power options – This means that you can operate them with gas, diesel or electricity. This is a great benefit and makes them applicable in different situations. If you do not want to buy gas or diesel and have all that messy work done, changing oil, cleaning them etc., you can simply plug them in an electric outlet and operate them.

Send us a message

12 + 1 =

Send us a message